ZHAGA

JL-722A2H(light-sensing + microwave,DALI2.0,infrared remote control)

The JL-722A2H light controller product is a smart latch type light controller developed based on the Zhaga Book-18 interface standard. It uses a combination of light sensing and microwave sensing sensors, can output DALI dimming signals, and supports infrared remote control for parameter configuration. This light controller is suitable for lighting scenarios such as roads, lawns, courtyards, parks, parking lots, factories, warehouses, etc.
The working logic of the product is that when the illumination is met, the lamp works at a slightly bright brightness and starts a countdown of the slightly bright duration. At this time, if a moving object is detected, the lamp becomes fully bright. When a moving object is detected and left, a countdown of the fully bright duration begins. After the countdown of the fully bright duration ends, it returns to the slightly bright brightness and starts a countdown of the slightly bright duration. When the countdown of the slightly bright duration ends or the illumination is met, the lamp is turned off.

Product size

MetInfo enterprise content manager system | MetInfo CMS

Product Features

  • 12-24VDC auxiliary source or DALI bus power supply, low power consumption

  • Zhaga Book-18 interface standard

  • DALI2.0

  • Dynamic adjustment of microwave frequency to avoid mutual interference during dense installation

  • Φ 50.4 * 35mm compact size, suitable for installation on various lighting fixtures

  • Light sensitivity+microwave, on-demand lighting, more energy-efficient

  • Visible light filtered photosensitive sensor

  • High performance microwave, with a hanging height of 15 meters and an induction radius of ≥ 10 meters

  • Infrared remote control

  • IP66

Power supply

AUX Power:  Voltage:12~24VDC  Current:12V/35mA;24V/25mA

DALI Bus powered: current:30mA

Power dissipation

<0.385W(12V);<0.55W(24V)

The AUX or DALI bus supply power.

Dimming

DALI

Sensors

Light sensitivity+microwave

Spectral range

avelength: 800~1100nm

Microwave frequency

5.8GHz

Maximum hanging height

15 meters

Induction radius

≥10 meters

Start-up time

<200mS

Power on initialization

By default, it remains turn on for 5s (gradient) when powered on, and then runs properly based on parameter Settings and environment conditions

Sensitivity

Default 80%, adjust through IR

Hold time

Default 30S, adjust through IR

Stand-by dim level

Default 0%, adjust through IR

Stand-by period

Default infinite, adjust through IR

Turn on Illuminance

Default 50lux, adjust through IR

Turn off illuminance ∆ value

Default ∆ 50lux, adjust through IR

Turn off illuminance

Turn on Illuminance + Turn off illuminance ∆ value 

Maximum power ratio

Factory default 100%, adjust through IR

Off → Stand-by dim time

Depending on the drive's fade time parameter, the default is 0S

Stand-by dim → 100% dim time

100% dim → Stand-by dim time

Stand-by dim → turn off time

mechanical vibration

IEC60068-2-6

Flammability Level

UL94-V0

Operating Temperature

-40 ℃~70 ℃

Storage Temperature

-40 ℃~85 ℃

Operating Humidity

5% RH~99% RH

IP Level

IP66

Certifications

CE、ZHAGA、D4i、DALI2.0、ROHS

热门推荐