Rate voltage:
Enclosure Size:
74dia.x 50mm
74dia.x 60mm
84dia.x 65mm
MOV diameter in mm:
110Jole / 3500Amp
235Jole / 5000Amp
460Jole / 7500Amp
Photocell Options:
0.5” photocell with heat sink
1” photocell Deluxe Version

Ordering Information

JL-202B - **M - ***12-****U

*:The Model Number

**:Enclosure Size

Null=74dia.x 50mm

M=74dia.x 60mm

H=84dia.x 65mm

***:MOV diameter in mm

12=110Jole / 3500Amp

15=235Jole / 5000Amp

23=460Jole / 7500Amp

****:Photocell Options

Null=0.5” photocell with heat sink

U=1” photocell Deluxe Version

Product Summary

The led dawn to dusk outside lights JL-202 series is applicable to control the street lighting, garden lighting, passage lighting and doorway lighting automatically in accordance with the ambient natural lighting level.

This product is designed on the basis of thermal - bimetallic structure that provides time delay over 30 seconds to avoid mis-operation due to spotlight or lightning during the night time. A temperature compensation system provides consistent performance regardless to the ambient temperature.

This product provides three twist-lock terminals meeting the requirements of ANSI C136.10-1996 and the Standard for Plug-In, Locking Type Photocontrols for Use with Area 

Technical Data

JL-202 Customzied Photocontroller Manufacturer

Product Features

-ANSI C136.10-1996 Twist Lock
-Time Delay 30~120 seconds
-Temperature compensated
-Various Enclosures
-Lightning Arrester Available
-1” Photocell Deluxe Version Available

Product Display

jl-202 photocontroller.jpg

longjoin photocontroller.jpg

Model No.JL-202AJL-202BJL-202CJL-202D
Nominal Rated Voltage110-120VAC220-240VAC208VAC277VAC
Applicable Volt RangeNominal +/-10%
Rated Frequency 50/60Hz
Rated Loading1800W Tungsten, 1000VA Ballast
Power Consumption1.5VA (Average)
Standard Operate Level10~20Lx On, 30~60Lx Off
Photocell Size****0.5” with heat sink (Standard) / 1” (Deluxe)
Ambient Temperature-40℃ ~ +70℃
Related Humidity 99%
Overall Dimensions (mm)Null: 74dia.x 50 (Clear) / M: 74dia.x 60 / H: 84dia.x 65
**Enclosure Color (M/H)Gray Maroon Blue or Client Request
**Clear Enclosure (Null)Available
Weight Approx.62~90grs

Product Materials:

Enclosure & Lens – High impact UV stabilized Polycarbonate
 Base – High impact Polybutylene terephthalate
 Photocell – Cadmium Sulfide 0.5” with heat sink (Standard) / 1” (Deluxe)


Ordering Information:

*JL-202B - **M - ***12-****U
*: The Model Number;
**: Enclosure Size:
 Null = 74dia.x 50mm;
 M = 74dia.x 60mm;
 H = 84dia.x 65mm.
***: MOV diameter in mm:
 12 = 110Jole / 3500Amp;
 15 = 235Jole / 5000Amp;
 23 = 460Jole / 7500Amp.
****: Photocell Options:
Null = 0.5” photocell with heat sink
U = 1” photocell Deluxe Version


Disconnect power; wire the color coded receptacle according to the diagram below. 

Push the photocontroller on and twist it clockwise to lock it into the receptacle.  

Install the photocontroller with the Photocell facing the NORTH direction as indicated on the top of the photocontroller.  

Adjust the receptacle position if necessary.

Initial Testing

It is normal for the SWITCH to take several minutes to turn off when first installed.<br>

To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.<br>

Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.<br>

Test will take approximately 2 minutes.