Ordering Information

*JL-200X(Z) - **14- ***G - ****06- *****L3

*:The Model Number

**:Lead Guage

18=AWG#18 (Not UL item)

16=AWG#16 (Not UL item)


***:Lead Grade

Null=105 degree C, AWM1015

G=150 degree C, AWM3321

****:Lead Length in inches

*****:Mounting Plate thickness

L1=Zinc Plated Steel 1.0mm

L2=Aluminum 1.8~2.0mm

L3=Aluminum 2.8~3.0mm

Product Summary

All the JL-200 series 3 Pin Nema Twist Lock Photocontrol Receptacle were designed for the lanterns those without an ANSI C136.10-1996 receptacle equipped to fit a twist-lock photocontrol.

Both JL-200-14 and JL-200Z14 have been listed, and JL-200X14 has been recognized by UL to applicable US and Canadian safety standards, under their file E188110, Vol.1 & Vol.2.

Technical Data

JL-200 Nema 3 Pin Twist Lock Photocontrol Receptacle

jl200 nema 3 pin photocontrol receptacle.jpg

Model No.JL-200XJL-200JL-200Z
Applicable Volt Range0~480VAC
Rated Frequency50/60Hz
Suggested LoadingAWG#18: 10Amp; AWG#14: 15Amp
Ambient Temperature-40℃ ~ +70℃
Related Humidity99%
Overall Dimensions (mm)65Dia.x38.565Dia.x65
AccessoryBack/Front Cover-
Zinc Alloy Lock Nut-
Mounting Plate/Base--


Leads6” Min.
Weight Approx. 80g105g135g

JL-200XZ nema 3 pin photocontrol receptacle.jpg


Disconnect power; wire the receptacle according to the diagram in right hand. An arrow indicating NORTH on the top of the receptacle is used to assist correct direction. Push the photocontroller on and twist it clockwise to lock it into the receptacle. 

Install the photocontroller with the Photocell facing the NORTH direction as indicated on the top of the photocontroller. 

Adjust the receptacle position if necessary.

Initial Testing

For other mounting methods, ask for the drilling plan to ensure the proper securement.