How can we help you?
How can we help you?
The JL-712A2H light controller product is a smart latch type light controller developed based on the Zhaga Book-18 interface standard. It uses a combination of light sensing and microwave sensing sensors, can output 0-10V dimming signals, and supports infrared remote control for parameter configuration. This light controller is suitable for lighting scenarios such as roads, lawns, courtyards, parks, parking lots, factories, warehouses, etc.
The working logic of the product is that when the illumination is met, the lamp works at a slightly bright brightness and starts a countdown of the slightly bright duration. At this time, if a moving object is detected, the lamp becomes fully bright. When a moving object is detected and left, a countdown of the fully bright duration begins. After the countdown of the fully bright duration ends, it returns to the slightly bright brightness and starts a countdown of the slightly bright duration. When the countdown of the slightly bright duration ends or the illumination is met, the lamp is turned off.
Feature
* 12-24VDC power supply, low power consumption
* Zhaga Book-18 interface standard
* 0-10V dimming mode
* Dynamic adjustment of microwave frequency to avoid mutual interference during dense installation
* Φ 50.4 * 35mm compact size, suitable for installation on various lighting fixtures
* Light sensitivity+microwave, on-demand lighting, more energy-efficient
* Visible light filtered photosensitive sensor
* High performance microwave, with a hanging height of 15 meters and an induction radius of ≥ 10 meters
* Infrared remote control
* IP66
Induction Diagram
Infrared remote controller
Introduce this remote controller function definition
Note: The infrared remote control controls a distance of about 20 meters, an angle of about ± 45 °, and the display screen has backlight function.
4 PIN Definition
Item | Definition | Type |
1 | 12-24 VDC | power input |
2 | GND / DIM- | power input |
3 | NC | Signal output |
4 | DIM+ (0-10+) | Signal output |
Note: Both # 3 and # 4 output dimming positive electrodes at the same time. When wiring the socket, either one of them can be connected to the driver or both can be connected simultaneously. If not connected, it is recommended to use insulation wrapping treatment.
The interface of the product itself has been fool-proof design, the installation only need to tighten the controller directly to the rotatable base, as shown in Figure clockwise after insertion.
| Model | JL-712A2H |
| Power supply | Voltage:12~24VDC Current:12V/35mA; 24V/25mA |
| Power consumption | <0.385W(12V);<0.55W(24V) |
| Dimming | 0-10V |
| Sensing | light sening+Mircowave |
| Microwave frequency | 5.8GHz |
| Maximum hanging height | 15 m |
| Induction radius | >=10m |
| Power on initialization | By default, it remains turn on for 5s (gradient) when powered on, and then runs properly based on parameter Settings and environment conditions |
| Sensitivity | Default 80%, adjust through IR |
| Hold time | Default 30S, adjust through IR |
| Stand-by dim level | Default 0%, adjust through IR |
| Stand-by period | Default infinite, adjust through IR |
| Turn on Illuminance | Default 50lux, adjust through IR |
| Turn off illuminance ∆ value | Default ∆ 50lux, adjust through IR |
| Turn off illuminance | Turn on Illuminance + Turn off illuminance ∆ value |
| Maximum power ratio | Factory default 100%, adjust through IR |
| Off → Stand-by dim time | 0.1s |
| Stand-by dim → 100% dim time | 0.1s When the stand-by dim level is 0%, it lasts for 0.2s, which is |
| 100% dim → Stand-by dim time | 8s When the stand-by dim level is 0%, it lasts for 9s, which is |
| Stand-by dim → turn off time | 1s |
| mechanical vibration | IEC60068-2-6 |
| Flammability Level | UL94-V0 |
| Storage Temperature | -40 ℃~85 ℃ |
| Operating Temperature | -40 ℃~70 ℃ |
| Operating Humidity | 5% RH~99% RH |
| IP Level | IP66 |
| Certifications | CE, ZHAGA, ROHS |
The interface of the product itself has been fool-proof design, the installation only need to tighten the controller directly to the rotatable base, as shown in Figure clockwise after insertion.
Copyright Longjoin Electronics Co., Ltd. Shanghai 2008. All Rights Reserved
沪ICP备2022000883号-1
