ANSI C136.10 JL-230 Limited Rotatable Series Receptacle

All the jL-230 series receptacles are intended to be pre-mounted onto those lanterns designed to fit an ANSi C136.10 twist-lock photocontrol.

Especially , jL-230F is intended to prevent water entrance through the wire strands.

This series also offers 360° rotation limiting feature to conform ANSl C136.10 reguirementsin case rotatable.

Number	JL-230(F)
Rated Voltage	-
Applicable Voltage Range	0-480VAC
Rated Frequency	50/60Hz
Signal Control	0-30 VDC, 250 mA Max
Wire Gauge	16AWG, 14AWG, 6inch
Operate Levels	40°C ~ +70°C
Load Rating	15A
Certificate	UL, CE,ANSI C136.41

Tips

* 230 standard body material Phenolic (Bakelite).

* 230F waterproof version made from PBT.

* there series 3 pin connector rear terminal wire, available choose do make cable wire.

An arrow indicating NORTH on the top of the receptacle is used to assist correct orientation.

Adjust the receptacle position by loosening screws and fasten them after its redirected.

1: Model Number

  F=Waterproof Version

2: Lead Rating

  16=16 AWG, 105ºC rated

  14=14 AWG, 105ºC rated

  14G=14 AWG 150 ºC rated

  16G=16 AWG 150 ºC rated

3: Lead Length           

  06= 6" (Customizable, 06 Min.)