NEMA/ANSI C136.41 5 PIN 240SXB Short Terminal Design

The JL-240SXB Rotary Lock Photocontroller Socket is designed for outdoor lighting fixtures and is intended to accept a rotary lock photocell for controlling LED lights. This product features two gold-plated, arcuate contact plates on its top surface, compatible with the spring contacts of the twist lock photocell (ANSI C136.41), and provides two signal wires on the back. Particularly, for situations where internal space is limited, this product does not occupy any space within the fixture.

JL-240SXB receptacle02.jpg

JL-240SXB receptacle03.jpg


NumberJL-240SXB
Rated Voltage-
Applicable
    Voltage Range
0-480VAC
Rated   Frequency50/60Hz
Wire Gauge16AWG,14AWG
Signal Control0-30 VDC, 250 mA Max
Operate Levels40°C ~ +70°C
Wire Length6inch
Load Rating15A
CertificateUL, CB, CE


JL-240SXB receptacle05.jpg

(here is only reference)Disconnect power; wire the receptacle according to the diagram below. An arrow indicating NORTH on the top face is used to assist in correct orientation.

JL-240SXB receptacle04.jpg

1: B=2 Dimming pads

2: Power Lead Rating

    14=14 AWG, 105ºC rated

    14G=14 AWG 150 ºC rated

    16S=16 AWG Double isolated wire (Class II)

3: 12= 12" (Customizable, 06 Min.