JL-207F-480VAC-Nema-Twist-Lock-Photocontrol-for-LED-Street-Lighting Control
Rate voltage:
**:
Customizable

Ordering Information

JL-207F*1 - 5*2 - F*3 - 23*4 - HVP*5 - P*6 - IP65*7 - F*8 (16*9 - 05*10 - 24*11 - 05*12 - T3.0*13)

*1:Rated Voltage

F=480V

Product Summary

The ANSI C 136.41 Nema Twist Lock Photocontroller JL-207 series is applicable to control the Street Lighting, Passage Lighting and Doorway Lighting automatically in accordance with the ambient natural lighting level, and midnight sleeping timer settings. This product is designed with microprocessor circuits with either sensors of CdS photocell, photodiode or IR-filtered phototransistor and a surge arrester (MOV) is provided. Its quicker response with time delay of 0-10 seconds for turning-on offers easy-to-test feature. Further, a preset 5-20 seconds
time-delay for turning-off might avoid mis-operation due to spotlight or lightning during the night time. This product meets the requirements of ANSI C136.10-2010 Standard Interface. Locking Type Photocontrol for Use with Area Lighting UL773, Listed by UL for both US and Canada markets.

480v jl207 nema photocell for street lighting control1.jpg

Technical Data

JL-207F 480V Ansi c136.41 Nema 3 Pin Twist Lock Photocontrol for Street Lighting Control

Product Features

-ANSI C136.10-2010 Twist Lock 
-Multi-Volts Application 
-Fully Customization Available 
-Surge Arrester Built-In 
-IR filtered Photodiode Sensor 
-Midnight Sleeping Available 
-Fail-On / Fail-Off Modes Available 
-Metal Armor Applicable

480v nema 3 pin photocontroller jl207.jpg


ModelJL-207F*
Rated Voltage480VAC
Rated Frequency50/60Hz
Rated Loading1000W Tungsten, 1800VA Ballast
Power Consumption0.5W [STD] / 0.9W [HP]
Typical On/Off Level16Lx On / 24Lx Off
Ambient Temp.-40℃ ~ +70℃
Related Humidity99% / 100% [IP67]
Overall Size82.5(Dia.) x 64mm
Weight Approx.110g [STD] / 125g [HP]


Installation

Disconnect power; wire the Nema 3 Pin Photocontrol Receptacle according to the diagram in right hand. Push the Photocontroller on and twist it clockwise to lock it into the Photocontrol Receptacle. Install the Photocontroller with the Photocontroller facing the NORTH direction as indicated on the top of the Photocontroller. Adjust the Photocontrol Receptacle position if necessary.

 

Initial Testing