How can we help you?
How can we help you?
Jl-205C-12VDC Electronic Photocell Switch is suitable for Landscape Lighting Control, Outdoor Lighting Control.
This type of Photocell Switch Light Controller can be based on nature lighting lux to Control LED lighting Auto ON/OFF.
The Photocell Light Controller is based on the Electronic Circuit Design, with short switching Time-Delay,
which can filter the natrural lighting at night.
It is easy to test and maintain. Its low voltage DC type JL-205C-12VDC is applicable
in the application area of solar power supply. No built-in surge protection.
JL-205C-12VDC Corresponding Socket Model:
JL-200, JL-210, JL-220 and JL-230
JL-205C-12VDC Electronic Photocell Switch for Solar Street Lighting Control
| Model | JL-205-12VDC |
| Rated Voltage | 12VDC |
| Rated Load | 75W Tungsten 75VA Ballast;2A E-BALLSST |
| Consumption | 0.5W(MAX) |
| On/Off Lux Level | 10-30Lux On;30-60Lux Off |
| Applicable Temperature | -40℃ ~ +70℃ |
| Relative Humidity | 99% |
| Dimension | 84(Dia.) x 66mm |
| Gross Weight | 85g |
Disconnect power; wire the color coded receptacle according to the diagram below.
Push the photocontroller on and twist it clockwise to lock it into the receptacle.
Install the photocontroller with the Photocell facing the NORTH direction as indicated on
the top of the photocontroller.
Adjust the receptacle position if necessary.
Copyright Longjoin Electronics Co., Ltd. Shanghai 2008. All Rights Reserved
沪ICP备2022000883号-1
