ZHAGA

JL-712G3L(light-sensing,LTE CAT.1,Microwave linkage)

The JL-712G3L single lamp intelligent controller adopts the wireless communication mode of LTE CAT1, which has the ability of light sensing and microwave sensing, and supports local wireless linkage function. It can still be linked when the network is disconnected. The dimming output mode is 0-10V. You can use our UM9900 management system for remote monitoring and configuration. This product is only suitable for detecting pedestrians and low-speed vehicles<20km/h.

Product size

MetInfo enterprise content manager system | MetInfo CMS

Product Features

  • ZHAGA standard interface

  • LTE Cat.1 communication

  • Synergia Modes Remote Configuration

  • Motion sensing upto 15m height

  • Synergying coverage upto 1km

  • Anti-mulfunction for outdoor purpose

  • Self-cycling prevented

  • LED Decay compensation built-in

  • Multi-sensing Strategy

  • Fault Dianosis & Report

  • MQTT Server Online Miguration Support

Power Supply

Rated voltage:12~24VDC,3W

It is recommended that the transient current response capacity reach 1A

Average power consumption

1.2W

Dimming Interface

Type:0~10V

Accuracy:±2%

Drive Current:20mA(Typical)

Communication

LTE+Sub-G

Spectral Acquisition Range

Range: 0.01~64000Lux

Accuracy: ± 2%

Wavelength:350~1100nm,Peak wavelength 550nm

Turn on Illuminance

100Lux(±10)

Turn off Illuminance

Reflected light + 40Lux(±10)after each turn on

Lower limit:50+40Lux(±10) Upper limit:6000Lux(±100)

Reflected light compensation upper limit

6000Lux(±100)

Microwave parameters

Frequency: 5.8 GHz

Supported hanging height: < 15m

Sensing radius: 4-6 meters

Sensing angle:<92 °

Linkage distance

≤1km

Default Tiny Brightness

20%

Default Tiny Light Maintenance Duration

permanent

Default trigger brightness

100%

Default trigger brightness maintenance duration

30S

Default Maximum Power Ratio

80%

Sensing radius

4-8m (by 15m hanging height)

Initialization Action

After startup, the light is turned on at 100% brightness by default, and it is taken over by the device operation mode after 5S

Lamp on delay

10S

Lamp off delay

10S

Duration of microwave induction light on

Default 30S platform adjustable

Microwave error prevention trigger

Possess certain ability to prevent wind, rain, leaves, and small animals

Trace brightness

Default 20% platform adjustable

Slightly bright duration

Default permanent platform adjustable

Network Protocol

MQTT

SIM card

Cato plug-in type

Supports 1.8V USIM cards

NANO package

Remote upgrade

Sustain OTA

Green LED

Indicator Light

Chang Liang: Successfully connected base stations

Blue LED

Indicator Light

Blinking: Connecting to the server

Always on: Successfully connected to the server

Default periodic reporting frequency

10 minute

Energy saving strategy

custom

Electrostatic discharge immunity

Contact discharge: ± 8kV, CLASSB

Air discharge: ± 15kV, CLASS B

Operating Temperature

-40℃~70℃

Storage Temperature

-40℃~85℃

Operating Humidity

5%RH~96%RH

IP Level

IP66

Structural material

foundation bed:PBT

Shell:PC

Standard

IEC61000-4-2、GB/T2423.10-2008、UL94-V0

Certifications


热门推荐