How can we help you?
For Your Outdoor Lighting
For Your Outdoor Lighting
Button Type Area Lighting Research Photocontrol
The button photoelectric switch is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.
By controlling the on and off of the lamps by the intensity of natural light, it is beneficial to protect the lamps, prolong the service life of the lamps and reduce energy consumption.
Especially for a wide range of outdoor lighting areas, manual management costs can be greatly reduced.
This button area lighting research photocontrol has been listed by UL Inc and is comply with the Standard for Non-industrial Photoelectric Switches for Lighting Control UL773A.
Swivel Type Photocell Light Sensor
The photoelectric switches are applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.
These Photocell Light Sensor is designed on the basis of electrical heating structure that provides time delay over 30 seconds to avoid redundant switching against spotlight or lightning during the night time. A temperature compensator system provides consistent performance regardless of the ambient temperature.
These Photocell has a gathered swivel with the sensor/switch body for convenient direction adjustment after installation. Additional swivel is also available for further adjustment.
This product is certified to the Standard for Non-industrial Photoelectric Switches for Lighting Control UL773A and applicable Canadian Standards.
Adjustable Type Outdoor Photocell
The photoelectric outdoor lighting switch JL-118 series is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.
These adjustable outdoor light photocell is designed on the basis of electrical heating structure that provides time delay over 30 seconds to avoid redundant switching against spotlight or lightning during the night time. A temperature compensator system provides consistent performance regardless of the ambient temperature.
JL-118 series is convenient direction adjustment after installation once an additional swivel is applied.
Electrical Type Photocell Sensor
The outdoor lighting electrical photocell is applicable to control the street lighting, garden lighting,passage lighting and doorway lighting automatically in accordance with the ambient natural lighting level. JL-401 provides a wide voltage range for customer applications under almost power supplies. Further, a preset 15-30 seconds time-delay might avoid misoperation due to spotlight or lightning during the night time.
FAQ About Landscape Lighting Photocell
Q1：How to Install a Landscape Light Photocell?
A1:Disconnect Landscape Photocell power, place screw thread of the PHOTOCELL SWITCH in knockout hole and fasten with rubber gasket and Zinc alloy lock-nut.Wire according to the diagram in right hand.Do not install the switch with the Photocell facing artificial or reflected light. This will cause the unit to cycle on and off at night
Q2：Why Use a Landscape Dusk to Dawn Light Sensor?
A2:Generally, LED Lighting Photocell Sensor are used in outdoor lighting environments, and the use of Photocell Switch can extend the service life of the lamps from the perspective of the lamp itself. From the perspective of economic costs, the use of Outdoor Photocell Sensor can avoid waste of power resources and save management costs.
Q3：What is the function of the Landscape Light Photoelectric Sensor Switch?
A3:The Photoelectric Sensor Switch is a controller that controls the switch of lamps and lanterns through the intensity of natural light. Receive the outdoor light signal through the photosensitive head, and then convert the light signal into an electric signal, which is transmitted to the lamp, and realizes automatic switch control of the Lamp.
Q4:How to replace Landscape Light Photocell for outdoor lighting?
A4:When replacing a new Dusk to Dawn Photocell, you need to keep the circuit open.
Follow the installation instructions to replace the new Automatic Day Night Sensor.
Q5:Why Photocell Light Stays On During Day?
A5:Under normal circumstances, the reason why the light with the Day Night Light Sensor is always on during the day may be: the Day Night Sensor is damaged and needs to be replaced. Or the photosensitive head of the Day and Night Light Sensor fails to receive natural light.
Q6:Why does the Dusk to Dawn Light Sensor set a time delay?
A6:Generally, the use environment of the Led Day Night Sensor is outdoors, and the Time-delay setting is to prevent the normal operation of the Dawn to Dusk Sensor from being affected by sudden light exposure, causing the lamp to flicker and causing damage to the internal components of the lamp.
Q7：What is UL773A about Adjustable Photocell?
A7:This is a standard established in North America for regional lighting related products.
This kind of standard is generally a standard for the circulation and use of a certain type of product in a certain area.UL773A is a standard for the circulation and use of Dusk to Dawn Photocell in North America. After certification, they can be sold and used locally.
Q8:What is Ambient Temperature?
A8:The general operating temperature range of the Dusk till Dawn Sensor is -40℃~70℃.