JL-202 Fotocélula
Rate voltage:
Enclosure Size:
74dia.x 50mm
74dia.x 60mm
84dia.x 65mm
MOV diameter in mm:
110Jole / 3500Amp
235Jole / 5000Amp
460Jole / 7500Amp
Photocell Options:
0.5” photocell with heat sink
1” photocell Deluxe Version
Length:
Customizable

Ordering Information

JL-202B - **M - ***12-****U

*:The Model Number

**:Enclosure Size

Null=74dia.x 50mm

M=74dia.x 60mm

H=84dia.x 65mm

***:MOV diameter in mm

12=110Jole / 3500Amp

15=235Jole / 5000Amp

23=460Jole / 7500Amp

****:Photocell Options

Null=0.5” photocell with heat sink

U=1” photocell Deluxe Version

Product Summary

The led dawn to dusk outside lights JL-202 series is applicable to control the street lighting, garden lighting, passage lighting and doorway lighting automatically in accordance with the ambient natural lighting level.

This product is designed on the basis of thermal - bimetallic structure that provides time delay over 30 seconds to avoid mis-operation due to spotlight or lightning during the night time. A temperature compensation system provides consistent performance regardless to the ambient temperature.

This product provides three twist-lock terminals meeting the requirements of ANSI C136.10-1996 and the Standard for Plug-In, Locking Type Photocontrols for Use with Area 


Technical Data

JL-101 MINITYPE PHOTOELECTRIC SWITCH

1.Product Summary

The photoelectric switch JL-101 is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.

2.Ordering Information

 

*JL-101A  **09  ***/ L N

 

*:  Model Number;

**:  Lead Length (in inches);

***:  Other Options:

  L = Couple metal lock-nuts  (Null = One metal lock-nut offered);

  N = Neoprene O-ring gasket for outdoor use. (Null = One gasket offered)

3.Technical Data

Model No.

JL-101A

JL-101B

Rated Voltage

120VAC

220-240VAC

Rated Frequency

50/60Hz

Rated Loading

600W   TUNGSTEN

480VA    BALLAST

Power consumption

1.5W max.

Operate Level

10~20Lx  Turn-On

60-80Lx  Turn-Off

Ambient Temperature

-20 ~ +70

Related Humidity

95%RH

Lock Nut

Brass made, ID 10mm

Lead WIre

AWG#20

Overall Dimensions

34(L) x 12.5(W) x 20(H)mm, Nipple Height 16mm

Leads Length

6 or Customer request (AWG#20)

Weight Approx.

12.5grs(7 )

4.Installation & Operational Instructions

Disconnect power, remove junction box cover, place the SWITCH in knockout hole and fasten with locknut.

Wire according to the diagram in right hand.

Do not install the switch with the Photocell facing artificial or reflected light. This will cause the unit to cycle on and off at night.

5.Initial Testing

It is normal for the SWITCH to take several minutes to turn off when first installed.

To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.

Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.

Test will take approximately 2 minutes.

6.Contact us

Shanghai Long-join Intelligent Technology Inc.

Add:2 floor 8 building Donglin Technology Park,No.129 Hulan west road,Baoshan District Shanghai China.  Postalcode 200443

Tel:+86-21-51083688

Fax:+86-21-51064051

Email:sales@longjoin.com


Installation

Disconnect power; wire the color coded receptacle according to the diagram below. 

Push the photocontroller on and twist it clockwise to lock it into the receptacle.  

Install the photocontroller with the Photocell facing the NORTH direction as indicated on the top of the photocontroller.  

Adjust the receptacle position if necessary.


Initial Testing

It is normal for the SWITCH to take several minutes to turn off when first installed.<br>

To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.<br>

Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.<br>

Test will take approximately 2 minutes.